Diy Wood Tray

Somehow this post was removed from my blog and sitting in draft mode so I published it again and I'm confused, anyway I guess I'll share it again.








In our living room we have a big ottoman for our coffee table, I picked it up a few years ago at Ikea in the As Is section for $40,  I love it except that it gets easily stained and dirty, and you can only dry clean the cover and it took my sister and I to put the cover back on. I'm thinking of a slipcover as soon as I find that right fabric for it.


You also need something on it to hold drinks or food so I was using this big round plastic tray for a while and I really wanted a wood tray. I've seen a few at Pier One Imports and Target but they are to pricy for looking cheap and not real wood.
So the other day I was in my workshop and saw some scrap wood and thought I could totally use it to make a tray. I started measuring and cutting pieces for the bottom.




I placed them together to make sure they were all the same size. 


Then cut a different size piece for the sides.


Then found pieces for the ends, and cut those to fit.


I used a nail gun to attach the long sides to the first piece of wood, and did the same to the other side.


Then I attached the end pieces to all the boards and sides. 


That's it for putting it together




There was no way I'd paint this, I love all the knots and grain so I knew I'd use stain. My sister had my walnut stain but it would be to dark so I went to my local small hardware store and picked up my new favorite stain color from Minwax. Driftwood.  Love love love it. 


I did 2 coats and a coat on the underside.
I used my Minwax finishing wax to make it shiny, smooth and protect it. 




Its not a sunny day here and the color looks different in some pictures but the ones above are what it really does look like. 












I love how I did this on a whim and I'm very very happy with the way it turned out. Although if a drink spills on it it will leak through but I knew that when I was making it. 
As for handles, I was thinking hardware pulls on each end but not sure yet what do you think?


This my new pillow and pillow cover I picked up at Ikea in the As Is section for $2 for the cover and $3 for the pillow form.


I will be sharing this creation at some great parties and you can find them here.